BAR-TEK 2.0L TFSI EA113 RS3 Injector Upgrade Kit 100% matched

4 injectors specifically for the 2.0L TFSI engine for power up to 500hp. With us now as a ready package with matching plugs and 100% matched nozzles!

Approx. 20% more flow than original S3 nozzles. At 130bar rail pressure up to 500PS possible. At higher pressure accordingly more. (For comparison is with the S3 nozzles at 380PS end)
Optimal spray pattern. Not to be compared with RS4 nozzles which have more flow, but give a wrong spray pattern.

In the kit 4 pieces are included including matching adapter plugs. PLUS: Nozzles are tested in advance and paired with each other! So you get perfectly matched nozzles for your 2L TFSI!

Features:
• Complete set with matching plugs and cables
• 100% adjusted and tested in our nozzle tester (matched)
• Power up to 500HP in the 2L TFSI ea113

Installation direction like RS3 cylinder head. It will take some machining of the valve or head to get the injectors far enough into the combustion chamber.

Already new injectors have a certain spread of the injection amount! Manufacturers state a tolerance of up to 8% as "normal". However, in the worst case, this can lead to incorrect injection quantities per cylinder. As a result, the cylinders get injected different amounts of fuel and the engine does not run clean or it can come to damage to piston or valves! Thanks to our ASNU nozzle test bench, we can also test new injection nozzles and thus pair them optimally with each other.

Need more fuel for more power? Then have a look at our RSX valves.